LIMS.SCIENCEConstruction Materials Testing Software & LIMS for Cement, Concrete and Geotechnical Labs
Construction-materials LIMS for cement, concrete, asphalt, soil and geotechnical testing. Configure single- or multi-site workflows for sampling, calculations, instrument capture, QC review and controlled reporting under applicable ASTM, EN and ISO methods.
Construction Materials LIMS Configured Around Methods and Acceptance Rules
The sector in practice · Construction materials
Two views of your laboratory workflow
Specimen dimensions, preparation and compression measurements are linked to the same material batch and technical report.
General examples shown for illustrative purposes.
AnalysesSamplesTechnical reviewReportLaboratory · Construction materials
Concrete strength and physical properties
CONSTRUCTION-260903 · MET-CMT-01 · PRESS-01 · BAL-02
| Sample | Compressive strength MPa | Density kg/m³ | Water absorption % |
|---|---|---|---|
CON-260903-001Concrete cylinder A | 40.2 | 2380 | 4.2 |
CON-260903-002Concrete cylinder B | 41.5 | 2375 | 4.3 |
CON-260903-003Concrete cylinder C | 40.9 | 2387 | 4.1 |
PRESS-01 · BAL-02Acquisition completeMET-CMT-01
Result file linked to the batch
CONSTRUCTION-260903 · 03/09/2026 · 15:20Illustrative interface · fictional data
Analytical report
RPT-CONSTRUCTION-260903-01 · Version 1.0
| Parameter | Unit | S01 | S02 | S03 |
|---|---|---|---|---|
| Compressive strength | MPa | 40.2 | 41.5 | 40.9 |
| Density | kg/m³ | 2380 | 2375 | 2387 |
| Water absorption | % | 4.2 | 4.3 | 4.1 |
| Diameter | mm | 100.1 | 100.0 | 100.2 |
| Height | mm | 200.2 | 200.1 | 200.3 |
S01 : CON-260903-001S02 : CON-260903-002S03 : CON-260903-003
Units and result qualifiers preserved.
Illustrative results only; no regulatory conformity conclusion.
Authorised on 05/09/2026 at 09:00Technical manager · Version 1.0
CONSTRUCTION-260903 · 05/09/2026 · 09:00Illustrative interface · fictional data
Results and authorised report
The same three samples and fifteen results, linked to technical review, quality controls and the versioned report.
LIMS for Materials Testing Labs, Built to International Standards
Common Parameters
- Compressive strength (7-day / 28-day)
- Flexural and tensile strength
- Slump and air content
- Water–cement ratio
- Density and specific gravity
- Moisture content
- Permeability and absorption
- Aggregate gradation (sieve analysis)
- Atterberg limits
- Proctor compaction values
- CBR (California Bearing Ratio)
- Asphalt stability and flow
- Bitumen content
- Rebar tensile and bend strength
- Weld quality checks
- …etc.
Lab Reports
- Concrete cube test report
- Cement chemical analysis report
- Soil classification certificate
- Aggregate sieve analysis summary
- Steel tensile test certificate
- Asphalt mix design report
- Compaction and density records
- Batch QC summary
- Calibration and verification logs
- Nonconformity reports
- Corrective action records
- Trend analysis charts
- Regulatory submission templates
- Controlled QC documentation
- Chain of custody reports
- …etc.
Compliance Standards
- ISO/IEC 17025
- ASTM standards for cement, concrete, asphalt, soils, and steel
- EN 206 concrete testing requirements
- BS methods for aggregates and reinforcement
- ISO guidelines for materials testing
- Local building code compliance
- Laboratory internal SOP validation
- Client-specific QA protocols
- Traceability and chain of custody rules
- Audit readiness and retention criteria
- Confidentiality and data integrity standards
- Standardised reporting formats
- …etc.
Materials Testing LIMS Features for CMT Laboratories
Control field sampling, materials testing, calculations, QC review and authorised certificate release in one construction-materials LIMS.
Logistics and Chain of Custody
Barcode each sample from site to result and record location, status, transport conditions and custody handovers at every stage.
Customer-Configured Workflows
Set rules that move samples through curing, compaction, and testing stages automatically. Assign tasks, trigger alerts for delayed tests, and reduce errors.
Integration
Configure scoped interfaces for supported hardness testers, spectrometers and tensile machines, with authorised integration routes to selected business systems through Odoo.
CMT Compliance
Set concrete, asphalt and soils limits from your local or state construction standards, and apply those rules in every test and approval.
Generate Reports
Create digital and printed test certificates with client details, pass–fail indicators, and compliance references.
Batch Management
Organise concrete cube sets, asphalt batches, and field density tests with automatic scheduling, curing logs, and report generation.
Integrated CMT LIMS, Powered by Odoo
Built on Odoo, a global ERP platform trusted by millions of users, our system brings together the full scope of construction materials testing in one place. From handling field samples to producing reports within the laboratory’s accredited scope, your lab can manage every step with accuracy and efficiency.
- Schedule and monitor tests for concrete cubes, asphalt cores, soils, steel, and aggregates
- Control curing timelines, batch records, and sample storage with automated reminders
- Capture supported equipment readings through scoped interfaces to reduce transcription risk and retain instrument context
- Provide secure access for technicians, QA staff, clients, and regulators with role-based permissions
- Manage consumables, calibration routines, and equipment maintenance alongside your testing workflows
- Generate digital certificates and client reports with full compliance references built in
FAQs
How does the LIMS support international construction-testing standards?
Yes. The system can support laboratories seeking or maintaining ISO/IEC 17025 accreditation and can be configured around applicable ASTM, EN, BS and local building-code requirements. Features include reviewable logs, traceable sample workflows and configurable reporting controls.
Does the system support multi-location labs and multiple users?
Absolutely. Whether you run a single testing facility or a network of branches, our LIMS allows:
· Role-based access for lab technicians, QA officers, and clients
· Centralised or site-specific data control
· Standardised SOPs for testing and certification
· Scalability from small labs to large accredited centres
Can the LIMS generate test certificates for clients and relevant authorities?
Yes. Test certificates for concrete, cement, steel, asphalt, aggregates, and soil can be generated automatically with your lab branding, client details, and standards references.
Can it integrate with construction testing instruments?
Yes. The system connects with compression testing machines, sieves, balances, ovens, and other equipment to capture results directly.
Can the LIMS handle both on-site and accredited labs?
Yes. Mobile forms allow data capture in field labs, while accredited facilities can use controlled audit trails, validation records and interlaboratory-comparison records.
What kind of support and training do you provide?
We provide full onboarding, user training, and ongoing technical support to ensure your lab staff get the most from the system.